Any advice on how to use mattx box

　　The Features about SK-MB4 Matte Box

　　1:Flexible, easy to add on and remove

　　2:Foldable and removable French flag and side wings

　　3:Fits for industry standard 15mm supporting rods

　　4:Universal anti-reflection fabric donut

　　5:High-grade ABS plastic and Aluminum construction

　　6:Adaptable to various lens sizes

　　7:With quick release/add on clamp design

　　8:Compatible with other accessories

　　Swing away design allow you to move the matte box away easily

　　Step 1:Insert 2pcs 15mm rods onto the main body as shown in the below figure, lock the rods by tightening the locking screw.

　　Step 2:Insert the connector to the 15mm rods as shown below, lock the connector by tightening the locking screw.

　　Step 3:Loosen screw A as shown in the below figure, install the French flag, and lock screw A to fix the French flag. Loosen screw B, adjust the French flag to a proper position and then lock screw B again. Install the other French flag in similar way.

　　Step 4:Loosen screw C and intall the left side wing as shown in below figure, adjust the side wing to a proper position, then lock screw C to fix the side wing. Install right side wing in similar way.

　　Step 5:Pull the fixing screw up as shown below, the main body can be moved aside to a position of 90 degree, loosen the fixing screw to fix the main body to that position

　　Step 6:Mount SK-MB4 to a 15mm rod system as shown below, lock the screw tightly to ensure SK-MB4 is fastened.

　　SK-MB4 can also be use together with shoulder rig, follow focus etc as shown in below figure, just for your reference.

  If you want to know more about sevenoak camera stabilizer,camera sliders,you can visit our official website!