How to Make a cheap DIY camera slider for your film ?

Camera Slider are sections of a different length and use different materials, with rigs mounted on them. You can move the camera at different speeds at the slider. You can usually use a computer to create complex movements that make them repeat themselves.

  During the 2D content shoot, the mobile video camera was able to take a very smooth and excellent action. It's easy to install any VR camera on a mobile camera, but it's equally cumbersome, and most of the car's brackets are captured. And because of its large size, it takes more than one operator to control it, and there are tracks, so there is a large screen that is blocked.sevenoak camera sliders are  considered the best video equipment.

  Camera Slider are sections of a different length and use different materials, with rigs mounted on them. You can move the camera at different speeds at the slider. You can usually use a computer to create complex movements that make them repeat themselves.

  The difference between the different rails is very large, both in the size of the rails and the speed of the motor. You will need a strong enough slide to support the camera, and choose the right motor to be able to drive the camera with enough speed to complete the exercise, and reduce the chance of error. Those cheaper stents will produce significant backlash when the movement stops and begin, which is a very undesirable exercise issue in VR photography.

  Heavy-Duty Camera Slider SK-HD100
  Sevenoak Heavy-Duty Camera Slider  SK-HD100 series Camera Sliders are designed to give you the ability to create high-quality videos without over-extending your budget. 
  •   Size: 100*14*12 cm
  •   Product weight: 3.81 KG
  •   Max load capacity: 12 KG
Sevenoak camera slider

  Camera Slider are much smaller than a dolly, but usually have a fairly long track that is also clearly visible in the shot. There is no easy way to remove it unless it is overwritten with an image. Learn more in the Clean Plates section below.

  Just like the Camera slider above, the motion control platform uses a series of track and motor-driven structures to precisely repeat the action. They are usually more bulky than the slide, which is basically a combination of a slide and a moving camera, but with a higher degree of freedom. There are many different types of such devices, the first large-scale use of Lucasfilm Star Wars shooting in order to capture the final synthesis required for a large number of scenes.

  The device fits most cameras, but is very bulky, and a large portion of the 360 ​​° scene is blocked and cumbersome to handle. However, if you need to synthesize many different levels of scenes, such as in a mixed CG / live VR scene, you can mount the camera on a motion control platform and shoot different levels of scenes against the green screen, which is a good one The choice, because the motion control platform can be easily removed.

      More information about sevenoak camera rig,camera stabilizer

Get in Touch With the Latest From Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak