How to Assemble a DSLR Camera cage

Sevenoak also provide SK-C03 DSLR camera cage with extra camera sider frames to meet customers who want to use battery grip on SK-C03, follow below steps to change the Default side frames to the extra side frames.

  Sevenoak also provide SK-C03 DSLR camera cage with extra camera sider frames to meet customers who want to use battery grip on SK-C03, follow below steps to change the Default side frames to the extra side frames.

  1. Loosen the side frames locking screws as shown in figure 1, remove the Default side frames.

  2. Take out the extra side frames, attach them to both sides of SK-C03 as shown in figure 2, tigethen the side frame locking screws, make sure the whole cage is securely fastened.

  3. Follow Step 3 to Step 10 to install your camera with battery grip onto SK-C03
 

Sevenoak camera cage


  How to install the camera cage?

  Step 1:Use the included hex wrench and three M4*8 screws to install the top hand grip and the top hand grip connector as shown in the below picture, ensure the screws are tightened.

  Step 2:Use the hex wrench and two M4*8 screws to attach the top hand grip to the main body as shown in the following picture, ensure the screws are tightened.

  Step 3:Turn the cage and camera upside down, put the camera into the cage, make sure the camera locking screw point is right under the locking point on the cage (see following picture), use the 1/4” camera locking screw to lock the camera, you can use the camera locking screw key to tighten the screw, make sure the camera is securely fastened.

  Step 4:Use two M4*8 screw to lock the quick release plate onto the main body as shown in the below picture, tighten the screws with the hex wrench

  Step 5:Insert two 15mm rods into the base plate, fix the rods at a proper position by tightening the screws on both sides of the base plate

  Step 6:Loosen the locking screw on the base plate, put the quick release plate onto the base plate, lock the quick release plate by tighting the locking screw on the base plate, make sure the screw is securely fastened

  Step 7 :Use two 1/4” cup head screws to lock the longer part of the HDMI plug protector onto a proper position on the main body.

  Step 8 :Lock the shorter part of the HDMI plug protector onto the longer part with a HDMI protector locking screw, do not fix the locking screw and make sure the shorter part is movable

  Step 9 :Take out the Mini HDMI adapter cable, insert the HDMI (Mini) plug through the plug protector and into the camera’s HDMI (Mini) port

  Step 10 :Use the other HDMI protector locking screw to lock the shorter part of the HDMI plug protector, tighten the screws and make sure both the HDMI plug protector and the HDMI cable is securely fastened

  Now the basic installation is completed, it is ready for shooting. You can add other accessories to this kit according to your requirement. You can hold the side frame or top hand grip while shooting, or you can mount it on a tripod. After shooting, remember to remove the camera from the cage.

      More information about sevenoak camera dolly,camera rig,camera stabilizer

Get in Touch With the Latest From Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak