中文版English

Affordable Camera Cage smooth and steady video

SK-A7C1 is a portable aluminum cage kit built for the Sony A7, A7S, A7R which adds protection, stability and mounting options to the camera. It includes form fitting camera cage, wood grip, top hand grip, micro HDMI adapter cable, HDMI plug protector, quick release base plate, cold shoes.

  SK-A7C1 Camera Cage  Kit for Sony A7, A7S, A7R ,A7 II , A7R II, A7S II

  SK-A7C1 is a portable aluminum Camera cage kit built for the Sony A7, A7S, A7R which adds protection, stability and mounting options to the camera. It includes form fitting camera cage, wood grip, top hand grip, micro HDMI adapter cable, HDMI plug protector, quick release base plate, cold shoes, 1/4” and 3/8” mounting points. The form fitting camera cage allows full access to the camera’s controls, buttons, battery and SD card slot. The cold shoes, 1/4” and 3/8” mounting points allows you to mount different accessories.

  The HDMI plug protector frees you from worrying about wearing out or damaging the micro HDMI port by repeatedly plugging or replugging a micro HDMI cable into your camera body. The HDMI plug protector clamps the micro HDMI adapter cable in place and also attaches to the cage itself, acting as a strain relief and providing a platform for the full-sized HDMI connector to attach, so it doesn’t just dangle freely. It also help to prevent your HDMI cable from accidentally coming unplugged during a shoot which is particularly important when using an external monitor or recorder.
 

sevenoak camera cage

  Step 1:Use the included Allen key and three M4*6 screws to install the top hand grip and the top hand grip connector as shown in the below picture, ensure the screws are tightened.

  Step 2:Use the Allen key and two M4*8 screws to attach the top hand grip to he main body as shown in the following picture, ensure the screws are tightened.

  Step 3:Turn the cage and camera upside down, put the camera into the cage, make sure the camera locking screw point is right under the locking point on the cage (see following picture), use the 1/4” screw to lock the camera, you may need to use a coin to tighten the screw, make sure the camera is securely fastened.

  Step 4:Use two M4*8 screw to lock the quick release plate onto the main body as shown in the below picture, tighten the screws with the Allen key.

  Step 5:Attach the HDMI plug protector to the main body as shown in the following picture, use two M4*10 screws and Allen key to lock the HDMI plug protector, make sure the screws are securely fastened

  Step 6:Insert the HDMI D (Micro) plug through the plug protector and into the camera’s HDMI D (Micro) port. Secure the cable by tightening the two plug protector screws.Fit the HDMI plug through the gap in the plug protector and lock it into place by tightening the plug protector screws.

  Step 7:Insert two 15mm rods into the base plate, fix the rods at a proper position by tighten the screws on both sides of the base plate

       More information about sevenoak Camera dolly,Camera slider,Camera rig

Get in Touch With the Latest From Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak