中文版English

A Guide to Choosing a Tripod Head

Sevenoak SK-EBH01 Panoramic triopd Head is a specially designed light weight and portable electronic panorama ball head for use with smartphone, action cameras, and light weight DSLRs around 2.0KG. SK-EBH01 Pro is an easy-to-use time lapse device

  Sevenoak SK-EBH01 Panoramic triopd Head  is a specially designed light weight and portable electronic panorama ball head for use with smartphone, action cameras, and light weight DSLRs around 2.0KG. SK-EBH01 Pro is an easy-to-use time lapse device,users can set dierent rotating angle and time directly on the device.SK-EBH01 Pro comes with 1/4” screw thread on the top for mounting camera and comes with 1/4” to 3/8“ screw hole at the bottom, so it can be used together with tripod,slider or any other device with 1/4” or 3/8” screw thread.With SK-EBH01 Pro, users can make their own time lapse videos easily with low budget.

  SK-EBH01 Pro Electronic Ball Head Pro

  Battery capacity: 1200mAh

  Charging voltage: DC 5V/1A

  Working temperature: -10~45 degree

  Standby time: over 50 hours

  Max load capacity: 2.0KG (Horizontal)

  Max load capacity: 2.0KG (30 degree slope)

  Max load capacity: 1.5KG (Vertical)

sevenoak camera tripod head

  1. Turn the power switch on, when the R.T LED “5’ “and Duration LED “15°” are on, means this device is working normally.

  2.Duration button means that you can select dierent angle at your desire. Press Duration button, select an angle (such as 90°) you need, the LED under the angle (such as 90°) will be on. This means that the angle has been set correctly

  3.R.T button means that you can select a time to accomplish the angle you selected. Press R.T button, select a time (such as 5’) you need, the LED under the time (such as 5’) will be on. This means that the time has been set correctly

  4.Start/stop button means to start or stop the setting you selected. Press Start/stop button, SK-EBH01 Pro starts to work as the setting you selected, press start/stop button again, SK-EBH01 Pro stops working, and in the meantime, the setting you selected will not be saved automatically.

  5.When SK-EBH01 Pro stops working (but with poweron), you can set it to run clockwise or anti-clockwise by short pressing Duration and R.T button at the same time.

  6. After use, switch the power off, the Duration and R.T LEDs will be off which means the device is off.

  When four R.T LED lights blink at the same time, it means battery is low or will be power o soon, you need a 5V/1A Micro USB cable to re-charge the battery.Do not force to rotate the rotating table by hand to avoid damage the motor inside.You can set the device to run 360 degree in 5 minutes, when it comes to 0 degree, press the stop buttom

      More information about sevenoak camera slider,camera rig,camera dolly

Get in Touch With the Latest From Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak